The electric arc in an arc lamp consists of gas, which is initially ionized by a high voltage and therefore becomes electrically conductive. To start an arc lamp, a very high voltage is pulsed across the lamp to "ignite" or "strike" the arc across the gas. This requires an electrical circuit with an igniter and a ballast. The ballast is wired in series with the lamp and performs two functions.First, when the power is first switched on, the igniter/starter sets up a small current through the ballast and starter. This creates a small magnetic field within the ballast windings. A moment later the starter interrupts the current flow from the ballast, which has a high inductance and therefore tries to maintain the current flow (the ballast opposes any change in current through it); it cannot, as there is no longer a 'circuit'. As a result, a high voltage appears across the ballast momentarily - to which the lamp is connected, therefore the lamp receives this high voltage across it which 'strikes' the arc within the tube/lamp. The circuit will repeat this action until the lamp is ionized enough to sustain the arc.When the lamp sustains the arc, the ballast performs its second function, to limit the current to that needed to operate the lamp. The lamp, ballast and igniter are rated matched to each other; these parts must be replaced with the same rating as the failed component or the lamp will not work.The colour of the light emitted by the lamp changes as its electrical characteristics change with temperature and time. Lightning is a similar principle where the atmosphere is ionized by the high potential difference (voltage) between earth and storm clouds.The temperature of the arc in an arc lamp can reach several thousand degrees Celsius. The outer glass envelope can reach 500 degrees Celsius, therefore before servicing one must ensure the bulb has cooled sufficiently to handle. Often, if these type of lamps are turned off or lose their power supply, one cannot restrike the lamp again for several minutes (called cold restrike lamps), some lamps (mainly fluorescent tubes/energy saving lamps) can be restruck as soon as they are turned off (called hot restrike lamp).Saturday, June 19, 2010
Arc lamp
The electric arc in an arc lamp consists of gas, which is initially ionized by a high voltage and therefore becomes electrically conductive. To start an arc lamp, a very high voltage is pulsed across the lamp to "ignite" or "strike" the arc across the gas. This requires an electrical circuit with an igniter and a ballast. The ballast is wired in series with the lamp and performs two functions.First, when the power is first switched on, the igniter/starter sets up a small current through the ballast and starter. This creates a small magnetic field within the ballast windings. A moment later the starter interrupts the current flow from the ballast, which has a high inductance and therefore tries to maintain the current flow (the ballast opposes any change in current through it); it cannot, as there is no longer a 'circuit'. As a result, a high voltage appears across the ballast momentarily - to which the lamp is connected, therefore the lamp receives this high voltage across it which 'strikes' the arc within the tube/lamp. The circuit will repeat this action until the lamp is ionized enough to sustain the arc.When the lamp sustains the arc, the ballast performs its second function, to limit the current to that needed to operate the lamp. The lamp, ballast and igniter are rated matched to each other; these parts must be replaced with the same rating as the failed component or the lamp will not work.The colour of the light emitted by the lamp changes as its electrical characteristics change with temperature and time. Lightning is a similar principle where the atmosphere is ionized by the high potential difference (voltage) between earth and storm clouds.The temperature of the arc in an arc lamp can reach several thousand degrees Celsius. The outer glass envelope can reach 500 degrees Celsius, therefore before servicing one must ensure the bulb has cooled sufficiently to handle. Often, if these type of lamps are turned off or lose their power supply, one cannot restrike the lamp again for several minutes (called cold restrike lamps), some lamps (mainly fluorescent tubes/energy saving lamps) can be restruck as soon as they are turned off (called hot restrike lamp).
Subscribe to:
Posts (Atom)